Punch BRT 2-Channel Amplifier
| Model | PBR300X2 |
|---|---|
| Manufacturer | Rockford-Fosgate |
| Weight | 2.800000 |
| Amplifier Type | 2-Channel |
| Total Power Output | 300 Watts |
| Rated Power (RMS Continuous Power) | 100 Watts x 4 @ 4-Ohm, 150 Watts x 4 @ 2-Ohm, 300 Watts x 2 @ 4-Ohm Bridged, 2-Ohm x 2 Bridged Stable |
| Dynamic Power | 114 Watts x 2 @ 4-Ohm , 160 Watts x 2 @ 2-Ohm , 387 Watts x 1 @ 4-Ohm Bridged |
| Bridgeable | Yes |
| Frequency Response (Hz) | 20Hz - 20kHz +/-3dB |
| Input Sensitivity High | 150 mV - 11 V |
| Circuit Topology Class | Class BR |
| Efficiency (average) | 68% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise) | 4-Ohm: <1.0% , 2-Ohm: <1.0% |
| Signal Input | High/Low Level Input: 4-Pin harness, Hi-Level Sensitivity: Variable DC offset sensitivity |
| Tone Controls | Optional Remote Punch EQ |
| Remote Controls | Optional PEQ provides 0dB to +18dB @ 45Hz |
| Visual Indicators | Power/Protect, BRT (Boost) |
| Power Wire Gauge | 10 AWG |
| Power Input Connector | Detachable Compression Terminal |
| Speaker Wire Gauge | 16 AWG |
| Speaker Output Connector | 4-Pin Harness |
| Cooling | Convection |
| Operating Voltage | 9 - 16 VDC |
| Recommended Fuse | 50 A |
| Average Current Draw | 23 A |
| Max. Current Draw | 45 A |
| Suggested Alternator | 75 A |
| Crossover Controls | High-Pass: 50Hz - 500Hz @ 12dB/Octave Butterworth, Low-Pass: 50Hz - 500Hz @ 12dB/Octave Butterworth All-Pass: Yes |
| Dimension - Length x Width x Height - Inches(mm) | 1.53 x 4.25 x 6.75 (in.) 3.90 x 10.8 x 17.2 (cm) |
