Punch BRT Mono Amplifier
| Model | PBR300X1 |
|---|---|
| Manufacturer | Rockford-Fosgate |
| Weight | 2.760000 |
| Amplifier Type | 1-Channel |
| Total Power Output | 300 Watts |
| Rated Power (RMS Continuous Power) | 75 Watts x 1 @ 4-Ohm, 150 Watts x 1 @ 2-Ohm, 300 Watts x 1 @ 1-Ohm |
| Dynamic Power | 96 Watts x 1 @ 4-Ohm , 189 Watts x 1 @ 2-Ohm , 326 Watts x 1 @ 1-Ohm |
| Bridgeable | No |
| Frequency Response (Hz) | 20Hz - 250Hz +/-3dB |
| Input Sensitivity Low | 150 mV - 4 V |
| Input Sensitivity High | 400 mV - 11 V |
| Circuit Topology Class | Class BR |
| Efficiency (average) | 75% @ 4-Ohm, 75% @ 2-Ohm, 75% @ 1-Ohm |
| Total Harmonic Distortion (THD+Noise) | 4-Ohm: <1.0%, 2-Ohm: <1.0% |
| Signal Input | High/Low Input Switch , High/Low Level Input: 4-Pin harness , Hi-Level Sensitivity: Variable DC offset sensitivity |
| Tone Controls | External via Optional Punch EQ |
| Remote Controls | Optional PEQ provides 0dB to +18dB @ 45Hz |
| Visual Indicators | Power/Protect, BRT (Boost) |
| Power Wire Gauge | 10 AWG |
| Power Input Connector | Detachable Compression Terminal |
| Speaker Wire Gauge | 16 AWG |
| Speaker Output Connector | 4-Pin Harness Wiring Convenience: 2 Negative Terminals (-) 2 Positive Terminals (+) |
| Cooling | Convection |
| Operating Voltage | 9 - 16 VDC |
| Recommended Fuse | 30 A |
| Average Current Draw | 15 A |
| Max. Current Draw | 30 A |
| Suggested Alternator | 75 A |
| Crossover Controls | Low-Pass: 35Hz - 250Hz @ 12dB/Octave Butterworth |
| Dimension - Length x Width x Height - Inches(mm) | 1.53 x 4.25 x 6.75 (in.) 3.90 x 10.8 x 17.2 (cm) |
