1,000 Watt Class-ad Full-range 4-channel Amplifier
Model | T1000-4AD |
---|---|
Manufacturer | Rockford-Fosgate |
Weight | 14.450000 |
Amplifier Type | 4-Channel |
Total Power Output | 1000 Watts RMS |
Rated Power (RMS Continuous Power) | 250 Watts x 4 @ 4-Ohm, 250 Watts x 4 @ 2-Ohm, 250 Watts x 4 @ 1-Ohm, 500 Watts x 2 @ 4-Ohm Bridged, 500 Watts x 2 @ 2-Ohm Bridged |
Dynamic Power | 270 Watts x 4 @ 4-Ohm 0° Res,327 Watts x 4 @ 2-Ohm 0° Res,365 Watts x 4 @ 1-Ohm 0° Res,619 Watts x 2 @ 4-Ohm Bridged, 654 Watts x 2 @ 2-Ohm Bridged |
Bridgeable | Yes |
Frequency Response (Hz) | 20Hz to 20kHz +/-1dB |
Input Sensitivity High | 150 mV to 5 V |
Circuit Topology Class | Class AD |
Efficiency (average) | 84.1% @ 4-Ohm , 81.6% @ 2-Ohm , 81% @ 1-Ohm |
Total Harmonic Distortion (THD+Noise) | 4-Ohm: <1.0% , 2-Ohm: <1.0% |
Signal Input | Front Channels: 1 RCA pair , Rear Channels: 1 RCA pair , Input Switch: 2CH / 4CH, |
Signal Output | 1 RCA pair |
Tone Controls | Front Channels: Treble: 0dB to +12dB @ 12kHz, Bass: 0dB to +18dB @ 45Hz, Rear Channels: Treble: 0dB to +12dB @ 12kHz, Bass: 0dB to +18dB @ 45Hz Function depends upon crossover setting (LP/AP/HP) |
Remote Controls | Optional Remote PEQ (overrides rear channel built-in Punch EQ) |
Visual Indicators | Power (Blue LED), Thermal (Red LED),Protect (Yellow LED) |
Power Wire Gauge | 4 AWG |
Power Input Connector | Block |
Speaker Wire Gauge | 8 AWG to 16 AWG |
Speaker Output Connector | Block |
Cooling | Convection |
Operating Voltage | 9 - 16 VDC |
Recommended Fuse | 150 A |
Average Current Draw | 60 A |
Max. Current Draw | 120 A |
Suggested Alternator | 75 A |
Crossover Controls | Front Channels: High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth, Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth, Rear Channels: High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth, Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth, |
Dimension - Length x Width x Height - Inches(mm) | 2.14 x 8.14 x 14.91 (in) 5.42 x 20.68 x 37.86 (cm) |