1000 Watt Class-bd Constant Power Amplifier
| Model | T1000-1BDCP |
|---|---|
| Manufacturer | Rockford-Fosgate |
| Weight | 12.200000 |
| Amplifier Type | 1-Channel |
| Total Power Output | 1000 Watts RMS |
| Rated Power (RMS Continuous Power) | 700 Watts x 1 @ 4-Ohm, 1000 Watts x 1 @ 2-Ohm, 1000 Watts x 1 @ 1-Ohm |
| Dynamic Power | 772 Watts x 1 @ 4-Ohms, 1299 Watts x 1 @ 2-Ohms, 1395 Watts x 1 @ 1-Ohm |
| Bridgeable | No |
| Frequency Response (Hz) | 20Hz to 250Hz +/-0.5dB |
| Input Sensitivity High | 150 mV to 4 V |
| Circuit Topology Class | Class BD |
| Efficiency (average) | 85.6% @ 4-Ohm, 82.1% @ 2-Ohm, 70% @ 1-Ohm |
| Total Harmonic Distortion (THD+Noise) | 4-Ohm: <1.0%, 2-Ohm: <1.0%, 1-Ohm: <1.0% |
| Signal Input | 1 RCA pair |
| Signal Output | 1 RCA pair |
| Tone Controls | Bass: 0dB to +18dB @ 45Hz |
| Remote Controls | Optional Remote PEQ (overrides built-in Punch Bass) |
| Visual Indicators | Power (Blue LED), Thermal (Red LED), Protect (Yellow LED) |
| Power Wire Gauge | 4 AWG |
| Power Input Connector | Block |
| Speaker Wire Gauge | 8 AWG to 18 AWG |
| Speaker Output Connector | Block |
| Cooling | Convection |
| Operating Voltage | 9 - 16 VDC |
| Recommended Fuse | 150 A |
| Average Current Draw | 70 A |
| Max. Current Draw | 140 A |
| Suggested Alternator | 100 A |
| Crossover Controls | Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth, Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz |
| Dimension - Length x Width x Height - Inches(mm) | 2.14 x 8.14 x 13.66 (in) 5.44 x 20.68 x 34.69 (cm) |
