5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms!
The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.
To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.
Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.
| Model | FPX 5.1200 |
|---|---|
| Manufacturer | Focal |
| Weight | 94.100000 |
| Amplifier Type | 5-Channel |
| Signal-to-noise ratio | > 75 dB |
| CEA Power (4Ω) | 4 x 75 Wrms + 1 x 420 Wrms |
| Max power (2Ω) | 4 x 120 Wrms + 1 x 720 Wrms |
| Low Pass Filter | 50 Hz – 500 Hz |
| Subsonic Filter | 10Hz-50Hz(24dB/oct) |
| Max power (Bridged 4Ω) | 2 x 240 Wrms + 1 x 720 Wrms |
| Phase Control | 0 to 180° linear |
| Bass Boost | 0 to 12 dB linear |
| Bandwidth (-3dB) | 10 Hz - 20 kHz |
| Dimension - Length x Width x Height - Inches(mm) | 1317/64" x 657/64" x 21/4" (337 x 175 x 57 mm) |
| Protection | Short circuit/low impe-dance/reverse polarity/DC/voltage drop/over heat protection |
