The AP-4340 4-channel class AB amplifier can be used in three modes: 4, 3 or 2-channel.
In 4-channel mode, its CEA power of 4 x 70W RMS will allow you to get the most from your Auditor kits installed up front and in the rear. The 3-channel mode enables you connect a kit to channels one and two, as well as an Auditor subwoofer to channels three and four in bridged mode for a CEA power of 190W RMS under 2 Ohms. The 2-channel mode, which consists of bridging channels 1-2 and 3-4, provides a CEA power of 2 x 190W RMS under 2 Ohms.
Equipped with high-pass and low-pass crossovers, as well as a subsonic crossover, the AP-4340 amplifier guarantees the optimal performance of the kits and subwoofers in this line.
| Model | Auditor AP 4340 |
|---|---|
| Manufacturer | Focal |
| Weight | 6.060000 |
| Amplifier Type | Full Range |
| Input Sensitivity Low | 160mV |
| Total Harmonic Distortion (THD+Noise) | 0,06% |
| CEA Power (4Ω) | 4 x 70W RMS |
| Max power (2Ω) | 4 x 95W |
| High-pass Crossover (Ch 1-2) | 60Hz – 1.2kHz |
| High-pass Crossover (Ch 3-4) | 100Hz – 2.2kHz |
| Low-pass Crossover | 50 – 250Hz |
| Full range mode Bandwith | 10Hz- 30kHz |
| Max power (Bridged 4Ω) | 2 x 190W |
| Channel Separation ≥ | 45 dB |
| Bandwidth (-3dB) | 10Hz - 30kHz |
| Dimension - Length x Width x Height - Inches(mm) | 1325/64x131/32x91/43" (340x50x235mm) |
