Rockford Fosgate Punch PM500X1BD

Rockford Fosgate Punch PM500X1BD

Rockford Fosgate Punch PM400X2

Rockford Fosgate Punch PM400X2

Rockford Fosgate TM400X2AD

Rockford Fosgate TM400X2AD

Rockford Fosgate Punch PM500X1BD

500W Punch Series Class-bd Monoblock Marine Amplifier

Get a Quote
Availability: In stock
SKU
PM500X1BD
Price For Dealer

Features:

  • Monoblock Punch Series Class-bd Marine Amplifier
  • RMS Power Rating:
    • 4 ohms: 150 watts x 1 chan.
    • 2 ohms: 300 watts x 1 chan.
    • 1 ohms: 500 watts x 1 chan.
  • Dynamic Power:
    • 4 ohms: 224 watts x 1 chan.
    • 2 ohms: 410 watts x 1 chan.
    • 1 ohms: 787 watts x 1 chan.
  • Includes a Rockford Fosgate Performance Verification Certificate
    w/ Inspection Data & Actual Power Rating, (aka "Birth Sheet")
  • CEA-2006 compliant amplifier
  • CE Compliant
  • LED power (blue) and protect (red) indicators
  • Features C.L.E.A.N. Set-up with 10-step set-up procedure
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • Marine grade two part epoxy coating on circuit boards
  • Marine grade stainless steel hardware
  • Preamp RCA outputs to daisy chain multiple amps
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Balanced Differential Inputs, to eliminate noise picked up by signal cables
  • Protected against Dust, UV, & Corrosion
  • Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
  • Features MEHSA3 (Maximum Efficiency Heat Sink Application - gen3)
  • High level input capable with Auto Turn-On circuit:
    • Requires Rockford Fosgate RFIF2SW, sold separately
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • Input sensitivity: 150 mV - 12 V
  • Frequency Response: 20 - 250 Hz
  • Efficiency (average): 86% @ 4-Ohm
  • Total Harmonic Distortion (THD): <1.0%
  • Punch EQ Bass: 0 - +18dB boost @ 45Hz.
  • 12dB/octave Butterworth crossover (selectable)
  • Selectable subsonic/infrasonic filter: off / 28 Hz, 12 dB/octave
  • Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
  • Recommended Fuse Rating: 80A x 1 inline (not included)
  • Operating Voltage: 9 - 16 VDC
  • Max Current Draw: 70 A
  • Average Current Draw: 35 A
  • Power Wire Gauge: 4 AWG - 8 AWG
  • Speaker Wire Gauge: 8 AWG - 18 AWG
  • Dimensions: 7.76"W x 11.03"L x 2.38"H
More Information
Model PM500X1BD
Manufacturer Rockford-Fosgate
Weight 10.800000
Amplifier Type Monoblock
Total Power Output 500 Watts
Rated Power (RMS Continuous Power) 150 Watts x 1 @ 4-Ohm , 300 Watts x 1 @ 2-Ohm , 500 Watts x 1 @ 1-Ohm
Dynamic Power 224 Watts x 1 @ 4-Ohm , 410 Watts x 1 @ 2-Ohm , 787 Watts x 1 @ 1-Ohm
Bridgeable No
Frequency Response (Hz) 20Hz to 250Hz +/- 1.0dB
Input Sensitivity High 150 mV - 12 V
Circuit Topology Class Class BD
Efficiency (average) 86% @ 4-Ohm
Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%, 1-Ohm: <1.0%
Signal Input Hi/Low level: 1 RCA pair
Signal Output Low level: 1 RCA pair
Tone Controls Punch EQ2 Bass: 0dB to +18dB @ 45Hz
Remote Controls Optional Punch Level Control (PLC2) Ready
Visual Indicators Power/Protect/Thermal LED , Input Clip LED3 , Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD , 2VIOLET: 1% THD , 3RED: 10%+ THD
Power Wire Gauge 4 AWG
Power Input Connector Captive C-Clamp
Speaker Wire Gauge 8 AWG to 18 AWG
Speaker Output Connector Captive C-Clamp
Cooling Convection
Operating Voltage 9 - 16 VDC
Recommended Fuse 80 A
Average Current Draw 35 A
Max. Current Draw 70 A
Suggested Alternator 75 A
Crossover Controls Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth, Infrasonic Filter (IF): 28Hz @ 12dB/Octave All-Pass (AP): No
Dimension - Length x Width x Height - Inches(mm) 2.38 x 7.76 x 11.03 (in) 6.05 x 19.71 x 28.02 (cm)
Write Your Own Review
You're reviewing:Rockford Fosgate Punch PM500X1BD