The store will not work correctly in the case when cookies are disabled.
Rockford-Fosgate Punch Marine PM400X4
Rockford-Fosgate Punch Marine PM600X4
Rockford-Fosgate Punch Marine PM500X2
Rockford Moto-marine Amp 2X150w 4-ohm
Features:
- 2-Channel Punch Series Class-ab Marine Amplifier
- RMS Power Rating:
- 4 ohms: 150 watts x 2 chan.
- 2 ohms: 250 watts x 2 chan.
- Bridged, 4 ohms: 500 watts x 1 chan.
- Dynamic Power:
(PVC/PowerCube®)
- 4 ohms: 223 watts x 2 chan.
- 2 ohms: 365 watts x 2 chan.
- Includes a Rockford Fosgate Performance Verification Certificate
w/ Inspection Data & Actual Power Rating, (aka "Birth Sheet")
- CEA-2006 compliant amplifier
- CE Compliant
- LED power (blue) and protect (red) indicators
- Features C.L.E.A.N. Set-up with 10-step set-up procedure
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
- Preamp RCA outputs to daisy chain multiple amps
- Balanced Differential Inputs, to eliminate noise picked up by signal cables
- Protected against Dust, UV, & Corrosion
- Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
- Features MEHSA3 (Maximum Efficiency Heat Sink Application - gen3)
- High level input capable with Auto Turn-On circuit:
- Requires Rockford Fosgate RFIF2SW, sold separately
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- Input sensitivity: 150 mV - 12 V
- Frequency Response: 20 - 20,000 Hz
- Efficiency (average): 73% @ 4-Ohm
- Total Harmonic Distortion (THD): <1.0%
- Punch EQ Bass: 0 - +18dB boost @ 45Hz.
- 12dB/octave Butterworth crossover (selectable)
- Variable high-pass filter: 50 - 250 Hz, 12 dB/octave
- Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
- Recommended Fuse Rating: 80A x 1 inline (not included)
- Operating Voltage: 9 - 16 VDC
- Max Current Draw: 80 A
- Average Current Draw: 40 A
- Power Wire Gauge: 4 AWG - 8 AWG
- Speaker Wire Gauge: 8 AWG - 18 AWG
- Dimensions: 7.76"W x 13.28"L x 2.38"H
More Information
| Model |
PM500X2 |
| Manufacturer |
Rockford-Fosgate |
| Weight |
12.300000 |
| Amplifier Type |
2-Channel |
| Total Power Output |
500 Watts |
| Rated Power (RMS Continuous Power) |
150 Watts x 2 @ 4-Ohm , 250 Watts x 2 @ 2-Ohm , 500 Watts x 1 @ 4-Ohm Bridged |
| Dynamic Power |
223 Watts x 2 @ 4-Ohms 0° Res , 365 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable |
Yes |
| Frequency Response (Hz) |
20Hz to 20kHz +/- 1.0dB |
| Input Sensitivity High |
150 mV - 12 V |
| Circuit Topology Class |
Class A/B |
| Efficiency (average) |
73% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise) |
4Ω: <1.0%, 2Ω: <1.0% |
| Signal Input |
Hi/Low level: 1 RCA pair |
| Signal Output |
Low level: 1 RCA pair |
| Tone Controls |
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Punch EQ2 Treble: 0dB to +12dB @ 12kHz Function depends upon LP/AP/HP switch position |
| Remote Controls |
Optional Punch Level Control (PLC2) Ready |
| Visual Indicators |
Power/Protect/Thermal LED, Input Clip LED3, Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD |
| Power Wire Gauge |
4 AWG |
| Power Input Connector |
Captive C-Clamp |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Speaker Output Connector |
Captive C-Clamp |
| Cooling |
Convection |
| Operating Voltage |
9 - 16 VDC |
| Recommended Fuse |
80 A |
| Average Current Draw |
40 A |
| Max. Current Draw |
80 A |
| Suggested Alternator |
75 A |
| Crossover Controls |
High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth, Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth All-Pass: Yes |
| Dimension - Length x Width x Height - Inches(mm) |
2.38 x 7.76 x 13.28 (in) 6.05 x 19.71 x 33.73 (cm) |
