The store will not work correctly in the case when cookies are disabled.
Rockford Fosgate Prime M600-5
Rockford Fosgate Punch PM300X1
Rockford Fosgate Punch Marine PM1000X1BD
Punch Marine 1,000 Watt Class-bd Mono Amplifier
Features:
- Monoblock Punch Series Class-bd Marine Amplifier
- RMS Power Rating:
- 4 ohms: 300 watts x 1 chan.
- 2 ohms: 500 watts x 1 chan.
- 1 ohms: 1000 watts x 1 chan.
- Dynamic Power:
- 4 ohms: 491 watts x 1 chan.
- 2 ohms: 874 watts x 1 chan.
- 1 ohms: 1,430 watts x 1 chan.
- Includes a Rockford Fosgate Performance Verification Certificate
w/ Inspection Data & Actual Power Rating, (aka "Birth Sheet")
- CEA-2006 compliant amplifier
- CE Compliant
- LED power (blue) and protect (red) indicators
- Features C.L.E.A.N. Set-up with 10-step set-up procedure
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
- Preamp RCA outputs to daisy chain multiple amps
- Dual speaker terminals simplify the hookup of multiple speakers
- Balanced Differential Inputs, to eliminate noise picked up by signal cables
- Protected against Dust, UV, & Corrosion
- Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
- Features MEHSA3 (Maximum Efficiency Heat Sink Application - gen3)
- High level input capable with Auto Turn-On circuit:
- Requires Rockford Fosgate RFIF2SW, sold separately
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- Input sensitivity: 150 mV - 12 V
- Frequency Response: 20 - 250 Hz
- Efficiency (average): 86% @ 4-Ohm
- Total Harmonic Distortion (THD): <1.0%
- Punch EQ Bass: 0 - +18dB boost @ 45Hz.
- 12dB/octave Butterworth crossover (selectable)
- Selectable subsonic/infrasonic filter: off / 28 Hz, 12 dB/octave
- Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
- Recommended Fuse Rating: 140A x 1 inline (not included)
- Operating Voltage: 9 - 16 VDC
- Max Current Draw: 130 A
- Average Current Draw: 65 A
- Power Wire Gauge: 4 AWG - 8 AWG
- Speaker Wire Gauge: 8 AWG - 18 AWG
- Dimensions: 7.76"W x 13.28"L x 2.38"H
Power Subwoofer Channel:
- RMS Power @ 4 ohms: 300 watts x 1 channels
- RMS Power @ 2 ohms: 500 watts x 1 channels
- RMS Power @ 1 ohm: 1000 watts x 1 channels
More Information
| Model |
PM1000X1BD |
| Manufacturer |
Rockford-Fosgate |
| Weight |
12.900000 |
| Amplifier Type |
Monoblock |
| Total Power Output |
1000 Watts |
| Rated Power (RMS Continuous Power) |
300 Watts x 1 @ 4-Ohm , 500 Watts x 1 @ 2-Ohm , 1000 Watts x 1 @ 1-Ohm |
| Dynamic Power |
491 Watts x 1 @ 4-Ohms , 874 Watts x 1 @ 2-Ohms ,1,430 Watts x 1 @ 1-Ohm |
| Bridgeable |
No |
| Frequency Response (Hz) |
20Hz to 250Hz +/- 1.0dB |
| Input Sensitivity High |
150 mV - 12 V |
| Circuit Topology Class |
Class BD |
| Efficiency (average) |
86% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise) |
4-Ohm: <1.0%, 2-Ohm: <1.0%, 1-Ohm: <1.0% |
| Signal Input |
Hi/Low level: 1 RCA pair |
| Signal Output |
Hi/Low level: 1 RCA pair |
| Tone Controls |
Punch EQ2 Bass: 0dB to +18dB @ 45Hz |
| Remote Controls |
Optional Punch Level Control (PLC2) Ready |
| Visual Indicators |
Power/Protect/Thermal LED , Input Clip LED3 , Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD , 2VIOLET: 1% THD , 3RED: 10%+ THD |
| Power Wire Gauge |
4 AWG |
| Power Input Connector |
Captive C-Clamp |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Speaker Output Connector |
Captive C-Clamp |
| Cooling |
Convection |
| Operating Voltage |
9 - 16 VDC |
| Recommended Fuse |
140 A |
| Average Current Draw |
65 A |
| Max. Current Draw |
130 A |
| Suggested Alternator |
100 A |
| Crossover Controls |
Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth, Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth All-Pass: No |
| Dimension - Length x Width x Height - Inches(mm) |
2.38 x 7.76 x 13.28 (in) 6.05 x 19.71 x 33.73 (cm) |
