Provides navigation trigger wires and timed accessory output for replacing the factory radio and retains the factory-installed amplified audio system. Use a steering wheel interface module to retain the function of select factory controls (Please see the compatibility notes section for further details).
Features:
2002-up Volkswagen Radio Replacement Interface
The C2R-VW2 allows you to replace the factory radio in 2002-20011 VW CANbus vehicles
Built-In SWI-CAN to retain steering wheel controls
Retains factory-installed amplifier
PAC C2R-VW2 includes:
Data controlled RAP accessory output wire
Data controlled parking brake wire
Data controlled reverse trigger wire
Data controlled vehicle speed sense wire
Data controlled illumination output wire
Compatibility List:
Volkswagen
2012-2013 Beetle
2009-2013 CC
2006-2012 Eos
2002-2013 Golf
2006-2013 GTI
2002-2013 Jetta
2002-2013 Passat
2006-2010 Rabbit
2009-2013 Tiguan
2004-2010 Touareg
Compatibility Notes:
2011 Jetta will not provide a reverse output trigger
2010-Up vehicles the C2R-VW2 will not retain the digital amplifier in Dynaudio factory systems
2012-Up vehicles the C2R-VW2 will not retain the digital amplifier in Fender systems
2002-2005 vehicles, the C2R-VW2 will not provide a Reverse output trigger. This signal is unavailable on the date bus. You must be replacing a Double-Din factory radio. If the vehicle came with a factory Single-Din radio the C2R-VW2 is not compatible
2004-2007 Tourage will not retain digital audio amplified system seen when the vehicle is equipped with a factory navigation radio
