P20F is a 20cm (8″) subwoofer equipped with 320 gr/m² Flax cone for deep and controlled bass. It can work in both 10-liter-closed and 13-liter-bass-reflex cabinets. It provides 250-Watts RMS and a frequency response from 39 to 500Hz. This subwoofer is ideal for a small bass enclosure perfectly integrated in the vehicle.
The three Flax subwoofers consist of straightforward 4-Ohm voice coils which are perfectly suited for small enclosures (closed or bass-reflex). Several innovations raise their performance to an even higher level. Each model of subwoofer has a dual magnet, offering improved linearity and ensuring optimal magnetic power delivered to the voice coil, which features a new cooling system. Glass fibre has been used for the mounting of the voice coil, making it more robust while protecting the cone from the heat emitted. Last but not least, the new fixings connecting the cone to the voice coil and the spider to the basket improve reliability for extreme use (very high excursion).
| Model | SUB P 20F |
|---|---|
| Manufacturer | Focal |
| Weight | 6.000000 |
| Subwoofer Size | 8" |
| RMS Power Rating | 250W RMS |
| Max Power Rating | 500W |
| Frequency Response (Hz) | 39Hz – 500Hz |
| Sensitivity (dB @ 2.83V/1M) | 82.5dB |
| Cone Material | Flax® |
| Surround Type | Rubber |
| Nominal Impedance: | 4Ω |
| DC Resistance | 3.4 ohms |
| VC diameter | 38mm |
| VC Height | 28mm |
| Former | Glass Fiber |
| Layers | 4 |
| Wire | copper |
| Inductane | 1.7 mH |
| Xmax - Inch(mm) | 10mm |
| Magnet | 4-3/4″ (120mm) |
| Flux Density | 0.75T |
| Gap Height | 8mm |
| Voice Coil Diameter (inch/mm) | 2″ (50mm) |
| Fs-Free Air Resonance (Hz) | 38.5Hz |
| Vas (Liter) | 12L |
| Qts | 0.56 |
| Qes | 0.61 |
| Qms | 5.5 |
| Re (Ω)[series] | 3.4 ohms |
| Sd (cm2) | 216cm2 |
| Cms (mm/N) | 0.18 mm/n |
| Mms (g) | 95g |
| BL | 11.5 N/A |
| SPL | 82.5 dB |
| Woofer | 8″ (200mm) |
