The FDS 4.350 is the 4-channel model (4 x 58 Watts RMS) and the most versatile of the range. It can operate in 4-, 3- or 2-channel mode. In most cases, it will be used to amplify a car’s front and rear speaker drivers. It can also be used to drive front speaker drivers and a small subwoofer, for a small installation which stays simple and integrated.
| Model | FDS 4.350 |
|---|---|
| Manufacturer | Focal |
| Weight | 1.800000 |
| Amplifier Type | N/A |
| Signal-to-noise ratio | > 84dBA |
| Input Sensitivity Low | 0.2V - 5V |
| CEA Power (4Ω) | 4 x 58 Watts RMS |
| Max power (2Ω) | 4 x 100 Watts RMS |
| Max power (Bridged 4Ω) | 2 x 200 W RMS |
| Channel Separation ≥ | > 65dB |
| Bandwidth (-3dB) | 10Hz – 50kHz |
| Crossover Controls | 40Hz – 400Hz Configurable high-pass/low-pass crossover |
| Dimension - Length x Width x Height - Inches(mm) | 7-13/16 x 4-1/4 x 1-11/16 in (199 x 108 x 43mm) |
| Protection | Short circuit / low impedance / reversal of polarity / DC / power drop / heat protection |
