Speakers 4" K Series 2-way Components
The ES 100 K is an ultra-compact solution with an impressive SPL of 90dB (2.83 V/1 m) for such a small design.
It is composed of two 4" (100mm) speaker drivers with Kevlar® cones. The famous yellow cones of the K2 Power line are light, rigid and have excellent damping to provide dynamic sound with incredible definition. The centre of the cone is equipped with a phase plug for improved sound dispersion around the vehicle.
The high frequencies are faithfully reproduced by two 025/32" (20mm) TKM tweeters. Composed of aramid fibres, these inverted dome tweeters have an exclusive 'M'-shaped profile to control deformation and to reduce distortion. The new-generation tweeters feature very compact crossovers which are easy to install. Various accessories are supplied for assembling the tweeters, which can be installed in the factory locations, on tilting frames or flush-mounted.
The size of each component of this kit has been optimised to offer a very compact solution which can be adapted for all kinds of set-ups in all kinds of vehicles.
The kit is supplied with aluminum and mesh grilles.
Model | Kit ES 100 K |
---|---|
Manufacturer | Focal |
Weight | 0.470000 |
Types | 2-way component kit |
RMS Power Rating | 60W RMS |
Max Power Rating | 120W |
Frequency Response (Hz) | 110Hz- 22kHz |
Sensitivity (dB @ 2.83V/1M) | 90dB |
Cone Material | Composite K2 Power "W" sandwich cone |
Surround Type | Tuned Mass Damper (TMD®) |
Nominal Impedance: | 4Ω |
DC Resistance | 2.8Ω |
VC diameter | 25mm |
VC Height | 01/3" (8.5mm) |
Former | Kapton |
Layers | 2 |
Wire | CCAW |
Xmax - Inch(mm) | 2.3mm |
Voice Coil Diameter (inch/mm) | 013/16" (20mm) |
Tweeter | TKM ("M" profile aramid fiber inverted dome) |
Motor | Neodymium |
Fs-Free Air Resonance (Hz) | 140hz |
Vas (Liter) | 1l |
Qts | 0.9 |
Qes | 1.1 |
Qms | 4.2 |
Sd (cm2) | 54cm2 |
Cms (mm/N) | 0.26mm/N |
Mms (g) | 4.7g |
BL | 3.3 N/A |
SPL | 87.5dB |
Accessories | Supplied grilles |
Grille | Included |